Billion router manual wireless

Power on the router. Download the firmware. Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. If they are not, verify that you are using the proper cables. Ensure that all other devices connected to the same telephone line as your router e. Missing line filters or line filters installed being the wrong way around can cause problems with your ADSL connection, which includes frequent disconnections.

The default IP address of the router is If not, please refer to your Windows-related or other operating system manuals. Go to Start. Click on Control Panel. Then click on Network and Internet. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. Select the Local Area Connection, and right click the icon to select Properties. Then click OK to exit the setting. Click on Network.

Then click on Network and Sharing Center at the top bar. When the Network and Sharing Center window pops up, select and click on Manage network connections on the left window pane. In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. Click OK to finish the configuration. In the Control Panel, double-click on Network and choose the Configuration tab.

Select the Obtain an IP address automatically radio button. Then select the DNS Configuration tab. In the Control Panel, double-click on Network and choose the Protocols tab. Start IP Address: The default values are shown below. Gather the information as illustrated in the following table and keep it for reference. To configure this device, you must have IE 5.

After this, you can surf Internet right away. Follow the Easy Sign-On configuration wizard and it will guide you to complete the basic network configuration. Click continue. Show Auto scan result - Protocol information. Wait for the device to be configured. Save Configuration. Web Configuration Open your web browser, enter the IP address of your router, which by default is System Up-Time: Records system up-time. Connection: The current connection status. Gateway: The IP address of the default gateway.

It is case sensitive and must not excess 32 characters. Make sure your wireless clients have exactly the ESSID as the device, in order to get connected to your network. The default mode of wireless security is Disable.

For more information , turn to wireless security for help. Username: Enter the username provided by your ISP. You can input up to alphanumeric characters case sensitive. Password: Enter the password provided by your ISP. You can input up to alphanumeric characters case sensitive Service Name: This item is for identification purposes. If it is required, your ISP provides you the information. Maximum input is 15 alphanumeric characters. Select the one provided by your ISP Auth.

Protocol: Default is Auto. Leave this at 0. The size of the largest datagram excluding media-specific headers that IP will attempt to send through the interface. For detail, please turn to ADSL profile. If you are uncertain what services are available to you, and then please select Automatic.

The service provider is able to attach anything to an APN to create a data connection, requirements for APNs varies between different service providers. Most service providers have an internet portal which they use to connect to a DHCP Server, thus giving you access to the internet i. Authentication Protocol: Default is Auto. A PIN code is a numeric value used in certain systems as a password to gain access, and authenticate.

Default setting is Disable. In this case, if you want to join this wireless network, enter the exactly ESSID manually and some security settings. America , Europe, France, etc.

The Channel ID will be different based on this setting. As long as the passwords match, a client will be granted access to a WLAN. If you want to use wireless, you can select Enable. For security propose, change to a unique ID name which is already built into the router wireless interface. It is case sensitive and must not exceed 32 characters. Make sure your wireless clients have exactly the ESSID as the device in order to connect to your network.

The input format is in character style and key size should be in the range between 8 and 63 characters. This process is done automatically. Default value is Thus, any clients using the wireless setting to search for available or specific router on the network will not be able to discover the router whose Hide ESSID function is set to enabled. The default setting is disabled. The input format is in character style and the key size should be in the range between 8 and 63 characters.

Note: Wireless performance may degrade if the selected channel ID is already being occupied by other AP s. If you do not have any wireless, select Disable. WEP Authentication: To prevent an unauthorized wireless station from accessing the data transmitted over the network, the router offers a secure data encryption, known as WEP.

There are 3 options to select from: Open System, Shared key or both. Key : Enter the key to encrypt wireless data. To allow encrypted data transmission, the WEP Encryption Key values on all wireless stations must be the same as the router.

There are four keys for your selection. Click Apply to confirm the settings. Host Name lets you change the router name. Current time: Set the current time. See the Time Zone section for more information. Hardware Version: Device version. Software Version: Firmware version. Click the link, the following will appear. Upstream: Upstream rate. Downstream: Downstream rate. Line Attenuation Upstream : This is attenuation of signal in upstream. Line Attenuation Downstream : This is attenuation of signal in downstream.

Refresh: Press this button to get the latest statistics. Click Status to go to 3G configuration page. Signal Strength: The signal strength bar indicates current 3G signal strength. Network Name: The network name that the device is connected to. Card Name: The name of the 3G card. Card Firmware: The current firmware for the 3G card.

See the Firewall section of this manual for more information on this feature. Interface: The interface name on the router that this IP address connects to. Register Information: Register time information. You can trace historical information with this function. Please see the Firewall section of this manual for more details on how to enable Firewall logging.

Name: the description of this application. Internal Port: the internal service port. IP Address: the internal host IP address. Click Continue to go to next step. Or select Manually to go to step 4. Step 3: wait when the ADSL is scanning. Also you can Abort to manually setting and go to next step 4. Step 4: type the username and password provided by your ISP.

Click Continue to go on. Step 5: wait while the device is configured. Step 6: WAN connection configuration is successful. Step 7: Click Next to Wireless to do wireless configuration. For detail, please turn to WLAN in this manual for help. Step 8: wait while saving configuration to Flash. Step 9: success. Protocol: The current ATM protocol in the device Click on the Continue button and wait for your connection to be connected. If connection is successful the following image will be shown.

Each IP address entered in the fields must be in the appropriate IP form, which is four IP octets separated by a dot x. The Router will not accept the IP address if it is not in this format.

Netmask: Type the subnet mask assigned to you by your ISP if given. Service Name: Enter a name for this connection. The size of the largest datagram excluding media-specific headers an IP attempts to send through the interface. Click on the Continue button and wait for your connection to be connected. TEL No. Username: The username provided by your service provider. These functions are described in the following sections. Users usually only have one subnet in their LAN.

The default IP address for the router is Netmask: The default subnet mask on this router. It helps to connect two or more local networks to the ISP or remote node. In this case, an internal router is not required. Netmask: Specify a subnet mask on this virtual interface. Press Add to apply and the corresponding information will be listed below. Click Edit radio button, then the item you want to reedit will be displayed above just as showed below.

Time Schedule: A self-defined time period. You may specify a time schedule for your 65 Here we provide two groups of Time Schedule setting. You can flexibly set the time you want the wireless connection works. If you select Always On in group1, then the group2 is disabled.

While if you select any other item from the group1 drop-down menu, the group2 will be activated. Select the timeslot you want, then the wireless will work according to the time of the two time schedule settings. This will save your settings and restart your router. This will take around minutes. You should be able to connect to the Internet afterwards. Should you need assistance setting up your Trendnet Router, please feel free to call us on View our updated contact details or log a query on our Helpdesk for assistance.

Designed by Orion Software. Contact Us Mail Account. Step 4: This will then display the Login page to enter your router username and password see below image. Enter the username and password and click Log In Step 5: The below screen should be displayed.

Click Quick Start.